1, high resolution Kenbo Penmachine in use, Penma content of the white line, there are generally one or two or not line is not wide, this situation can be judged as a slight nozzle plug. In such a situation, if the business requirements of the printing effect is not very high, you can let the Coding equipment intermittent work, the first does not affect the production, and then contact the Pen Maji factory service. After shutting down check the nozzle condition. Granville code printer Friendly reminder users, there is such a situation most of the equipment maintenance and repair are not in place, so to understand more Pen Maji use of precautions in order to better serve the business.

2, the nozzle slightly blocked solution, the first squeeze ink, squeeze the ink cartridge forcibly until the nozzle has two or three drops of ink dripping. Then after testing, test equipment from the Coding equipment called Coding files, test Coding code to see if the Coding there is a white line. If there are white lines, continue to squeeze the cartridge, try the Penma. Can not solve that can only wait for service.

3, if the content of the code is small, edit the code may be sprayed to avoid the slightly blocked nozzle, try a few times to see can not be avoided, so that the temporary codec equipment to work, then contact the inkjet printer manufacturers, By the engineer. Improve sexual, effectively reduce the failure rate, equipment will have a longer continuous working hours, to ensure the production efficiency.